HARMAN / KARDON hk-330i

Autor

Beitrag

doigge
Schaut ab und zu mal vorbei

#1 erstellt: 15. Apr 2009, 21:05

hy ich hätte mal ne frage hat einer von euch die leistungsdaten von dem verstärker das einzige was ich bisher gefunden habe ist ein handbuch wo nix dazu drinsteht

Chiefmate07
Stammgast

#2 erstellt: 16. Apr 2009, 18:03

Hi doigge,

hier sind einige Daten:

FIRST MANUFACTURED: 1982
LAST MANUFACTURED: 1985

SPECIFICATIONS:
Tuner Section
Usable Sensitivity : FM MONO - 2.5uV
Quieting Sensitivity : MONO - 4.0uV STEREO - 45uV
Signal-to-Noise Ratio : FM STEREO - -72dB
Capture Ratio : 1.9dB
Alternate Channel Selectivity : 60dB
AM - 40dB
IF Rejection : 85dB
AM - 25dB
AM Rejection : 50dB
Stereo Separation : 45dB, 1kHz
Total Harmonic Distortion : FM MONO - 0.1%, 1kHz, 100% modulation
FM STEREO - 0.12% 1kHz, 100% modulation
Sensitivity : AM - 300uV/m
Selectivity : AM - 35dB
Image Rejection : AM - 45dB
Amplifier Section
Power Output : 20 watts RMS per channel @ <0.09% THD primarily low order harmonics (@ 8 ohms from 20Hz-20kHz)
Power Bandwidth : <10Hz - 60kHz at half rated output with 8 ohms
Frequency Response : <4Hz - 150kHz +0, - 3dB at rated output
Total Harmonic Distortion : 0.05% primarily low order harmonics (1kHz at rated output)
Intermodulation Distortion : 0.20% at rated output
High Instantaneous Current Capability (HCC) : 10
Slew Rate : 60 volts/uSec
Rise Time : SQUARE WAVE - 2.5uSec at 20kHz
Square Wave Tilt : 8% at 20kHz
Negative Feedback : 22dB
Damping Factor : 60 (at 8 ohms, 20Hz - 20kHz)
Hum and Noise : PHONO - -80dB "A" WTD AUX - -85dB "A" WTD
Input Sensitivity : PHONO - 2.2mV AUX - 135mV
Input Level/Impedance : PHONO - 125pF/47k ohms
Phono Overload : >130mV
RIAA Equalization : +/-1dB

Suche: